Stock Pumper Tanker

Chassis Overview

Cab: 2025 Freightliner M2 106 – AC, Power windows, mirrors and locks, AM/FM radio

Engine: Detroit 375 HP @ 2200 RPM, 1050 LB/FT @ 1200 RPM

Transmission:  Allison 3000 EVS Automatic

Axel Rating
Front: 18,000 LBS
Rear: 31,000 LBS
Axle ratio: 5.38 axle ratio

Suspension
Front:  Taper leaf – maintenance free rubber bushings
Rear:  Flat leaf spring – w/radius rod for Fire/Emergency service

Seats: Driver and passenger seats - H.O. Bostrom Sierra Air-50 High Back air

Pump House Overview

• Waterous CSU 1050 GPM / 5000 LPM w/ Electric MIVs
• Poly Armor painted – Frame and panels
• 40,000 BTU heater
• Innovative Controls – Gauges and levers
• Trident – Auto Prime on pump and 6” main intakes
• FRC InControl pressure governor with control knob and Tankvision water gauge
• Foam Pro 2001 – Foam on 2 cross lay and rear 2.5”

Discharges:

• Driver side – Two 2 ½” set at mid panel, two crosslay 1 ¾” w/ Chickstan adapters.
• Officer side – One 2 ½” set at mid panel, one 4” w/ Storz fitting.
• Rear – One 2 ½” just below hose bed for pre-connect option.
• TFT Tornado manual monitor

Intakes:

• Driver side – One 6” main and one 2 ½” Auxiliary
• Officer side – One 6” main and one 2 ½” Auxiliary

Water Reservoir

Tank: Brayneck Canaplast - Polypropylene

Capacity: 1500 Imp Gal w/ 25 Foam cell

Other Build Panel Features:

• Whelen Emergency light package w/ Traffic advisor
• FRC Maxvision tank level gauge on rear
• Rear ladder compartment fits – 24’ extension, 14’ roof, and 10’ attic
• Pike pole storage for 4 x 12’ with straight handles
• Custom 2 ½” to 1 ½” chrome caps
• Black coated Storz fittings and caps
• Marine grade 5052 3/16″ aluminum body sheet material, with 1/8″ aluminum checker overlays
• Diamondback chassis steps and rear tailboard
• Innovative Control fold down steps w/LED lights
• Anodized Amdor roll-up doors with integrated full length Lumabars with pull tether cords
• Aluminum folding ladder to access hose bed
• FRC InView reverse camera
• FRC- Vantage LED remote controlled spot lights on front of body
• SCBA storage for 2 packs and 2 bottles
• Aluminum hard covers with walkway and vinyl end flaps
• Low profile cross lay design with vinyl end flaps
• Newton Stainless Steel dump chute assembly with electric valve, 180* swivel, and telescopic chute.
• Fireman’s Friend tank fill on rear of tank– 4” Storz fitting
• Full graphics package w/ custom mural