2024 Pumper Rescue

2024 Pumper Rescue

Chassis Overview

Cab: 2024 Freightliner M2 106 – AC, Power windows, mirrors and locks, AM/FM radio
Engine: Detroit 375 HP @ 2200 RPM, 1050 LB/FT @ 1200 RPM
Transmission:  Allison 3000 EVS Automatic

Axel Rating

Front: 18,000 LBS
Rear: 31,000 LBS
Axle ratio: 5.38 axle ratio

Suspension

Front:  Taper leaf – maintenance free rubber bushings
Rear:  Flat leaf spring – w/radius rod for Fire/Emergency service
Seats: Driver seat - H.O. Bostrom Sierra Air-50 High Back air, passenger and three rear seats - H.O. Bostrom Tanker 450 SCBA air

Pump House Overview:

  • Waterous CSU 1050 GPM / 5000 LPM w/ Electric MIVs
  • Poly Armor painted – Frame and panels
  • 40,000 BTU heater
  • Innovative Controls – Gauges and levers
  • Trident – Auto Prime on pump and 6” main intakes
  • FRC InControl pressure governor with control knob and Tankvision water gauge
  • Foam ready – space provisions have been left if foam is an option

Discharges:

  • Driver side – Two 2 ½” set at mid panel, two crosslay 1 ½” w/ Chickstan adapter
  • Officer side – One 2 ½” set at mid panel, one 4” w/ Storz fitting
  • Rear – One 2 ½” just below hose bed for pre-connect option
  • Monitor ready - space provisions have been left if a monitor is an option

Intakes:

  • Driver side – One 6” main and one 2 ½” Auxiliary
  • Officer side – One 6” main and one 2 ½” Auxiliary

Water Reservoir

Tank: Brayneck Canaplast - Polypropylene
Capacity: 1000 Imp Gal w/ 25 Foam cell

Other build Panel Features:

  • Whelen Emergency light package w/ Traffic advisor
  • Maxvision tank level gauge on rear
  • Rear ladder compartment fits – 24’ extension, 14’ roof, and 10’ attic
  • Pike pole storage for up to eight 14’ with straight handles
  • Custom 2 ½” to 1 ½” chrome caps
  • Black coated Storz fittings and caps
  • Marine grade 5052 3/16″ aluminum body sheet material, with 1/8″ aluminum checker overlays
  • Diamondback chassis steps and rear tailboard
  • Innovative Control fold down steps w/LED lights
  • Anodized Amdor roll-up doors with integrated full length Lumabars with pull tether cords
  • Aluminum folding ladder to access hose bed
  • FRC InView reverse camera
  • SCBA cylinder storage in wheel wells – 4 bottles
  • Black vinyl hose bed tarp and crosslay flaps
  • Full graphics package w/ custom mural

PDF's

F53223-Proposal-Exterior-Open

F53223-Proposal-Exterior-Closed

Contact Details

If interested, the truck is planned to be ready for delivery at the end of September 2024.

Tobias Hovey
Battleshield Industries Limited
Phone:  613-443-1911
Email:  thovey@battleshield.ca

Battleshield